Garage door rails can be purchased in three widths, one, two and three inches. One-inch rails are most commonly used in truck and semi-trailer door applications. Two-inch rails comprise most residential and commercial applications. Three-inch rails support and guide the heaviest residential and industrial garage doors.
There are several types of garage door rails for various purposes covering commercial, industrial and residential spectrums. Garage door rails come in three different widths of 1, 2 and 3 inches. You're likely to find 3-inch rails in heavy industrial applications. Usually, no, you can't reuse the rail, they don't all have exactly the same dimensions.
There is no standard profile size, even within the same manufacturer, they change over the years. Are you trying to evaluate which garage door rail option is the best fit for your new garage door? Whether you're building a new home or renovating an old garage, you need to make sure that the installation of the newly purchased garage doors works properly. If the door is too small, it may not have a proper grip, which will cause the door to slip and injure someone or damage vehicles. Remember to never use lubricating grease for caterpillars, as they can adhere to the protective layer and affect the movement of the door.
While free space may seem like a simple concept, pay attention to potential traps and obstructions when selecting your garage door and rail system. The 25-degree rail is used to prevent interference with handles or windows when opening the garage door. Keep in mind that when you lower the door, there is a lot of tension, but when you raise the garage door, the tension is released. This second rail is only used to move the upper section of the door, allowing the operator to easily move the upper section far enough for the lower sections to follow the lower track without problems. The garage door itself may be the star, but the tracks are essential to the functionality of the entire system.
The side ramp of a garage door track is the space available between the walls of the garage or the nearest obstacle and the vertical part of the driveway. These applications include doors up to 8 feet tall, which use standard torsion springs with the vertical part of the track resting on the ground. You need exact measurement numbers for this area, as this will affect the size of the tension springs and the amount of space left for the guide supports. Remember that this is a balancing act in selecting the best hardware for your door, as well as the best coordination motor for efficient door operation.
This determines how much space you have between the garage floor and the top of the finished door opening. Here are some of the most common garage door rail options, along with the specifications for free space, side space, and rear space.
